After you have succesfully installed the Free X-Lite PC Phone (for install guide click Technical Support), you will be prompted with the following screen:
Click the Add button.
Fill in the fields on the Account tab as they appear in the above image. The fields that need to be completed are:
- Display Name: Enter the name you would like to display on your SIP calls.
- User name: Your MicroTalk provided telephone number.
- Password: Your MicroTalk password.
- Authorization user name: Your MicroTalk provided telephone number.
- Domain: sip.coms.com
Ensure there is a tick next to Register with domain and receive incoming calls and activate the button for proxy. Enter the address as sip.coms.com
Click on the Voicemail tab and place a tick next to Check for Voicemail. Enter the number *99 in the Number to dial for checking voicemail, then click OK.
Your SIP Accounts window should now contain an enabled account, click Close.
You will now be presented with the dialler screen, this is the interface used to make and receive calls. To make a call, simply enter the phone number you wish to dial then click on the green phone symbol.
In order to test that you have successfully configured your phone, please dial 5101234567 now. You will hear a recording if your call is successful, if not please check your configuration settings before checking the support Knowledge Base.
Upon completion of the call, the dialler will appear as above. To adjust your volume, use the sliding bar on the right. To end the call, click on the red phone button.
Congratulations, you have completed your first VoIP call with MicroTalk!
If you wish to learn more about the advanced functions of the X-Lite software package, please download the X-Lite V3.0 User Guide here below.
Download the X-Lite V3.0 User Guide
(Adobe Acrobat PDF format)
If you do not have Acrobat Reader, please click on the Acrobat image below.
